Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img MAX3301EETJ+ datasheet by Maxim Integrated Products

    • USB On-the-Go Transceivers and Charge Pumps
    • Original
    • Yes
    • Yes
    • Transferred
    • EAR99
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    MAX3301EETJ+ datasheet preview

    MAX3301EETJ+ Frequently Asked Questions (FAQs)

    • The recommended PCB layout for the MAX3301EETJ+ involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
    • To ensure the MAX3301EETJ+ is properly powered, make sure to provide a clean and stable power supply within the recommended operating range of 2.7V to 5.5V. Also, ensure that the power supply is decoupled with a 0.1uF capacitor and a 10uF capacitor in parallel to filter out noise and ripple.
    • The MAX3301EETJ+ can support data rates up to 100Mbps, making it suitable for high-speed applications such as USB, SATA, and PCIe.
    • The MAX3301EETJ+ can be configured for differential or single-ended operation by connecting the appropriate pins. For differential operation, connect the IN+ and IN- pins to the differential signal source, and for single-ended operation, connect the IN+ pin to the signal source and the IN- pin to ground.
    • The typical power consumption of the MAX3301EETJ+ is around 10mA, but it can vary depending on the operating frequency, input signal amplitude, and output load.
    Supplyframe Tracking Pixel