The recommended layout and routing for the MAX313LCUE+T involves keeping the input and output traces separate, using a solid ground plane, and minimizing the length of the clock input trace. Additionally, it's recommended to use a low-ESR capacitor for the VCC bypass capacitor and to place it as close to the VCC pin as possible.
The MAX313LCUE+T requires a single 3.3V or 5V power supply. It's recommended to power the device with a low-noise power supply and to ensure that the power supply is stable before applying clock and data signals. The power sequencing requirement is to power up the device before applying clock and data signals.
The MAX313LCUE+T can handle clock frequencies up to 125MHz. However, the maximum clock frequency may vary depending on the specific application and operating conditions.
A reliable reset circuit for the MAX313LCUE+T can be implemented using a simple RC circuit with a pull-up resistor and a capacitor. The reset signal should be asserted for at least 10ns to ensure a reliable reset.
The MAX313LCUE+T has a maximum junction temperature of 150°C. To ensure reliable operation over temperature, it's recommended to keep the device within the specified operating temperature range, use a heat sink if necessary, and ensure good airflow around the device.
MAX313LCUE+T datasheet
by Maxim Integrated Products
