The recommended PCB layout for the MAX1982EUT-T involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the input and output capacitors close to the device. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
The selection of input and output capacitors for the MAX1982EUT-T depends on the specific application requirements. In general, X5R or X7R ceramic capacitors with a voltage rating of 10V or higher are recommended. The capacitance value should be chosen based on the desired output voltage ripple and the input voltage range. A minimum capacitance of 1uF is recommended for the input capacitor, and 2.2uF or higher for the output capacitor.
The MAX1982EUT-T is rated for operation over a temperature range of -40°C to +125°C. However, the device's performance and reliability may be affected at extreme temperatures. It's recommended to operate the device within a temperature range of -20°C to +85°C for optimal performance and reliability.
The MAX1982EUT-T has a specific power-up and power-down sequence that must be followed to ensure proper operation. The device should be powered up by applying the input voltage (VIN) before the enable signal (EN). During power-down, the enable signal should be turned off before the input voltage is removed. Additionally, the device should be powered up and powered down slowly to prevent voltage spikes and noise.
The recommended input voltage range for the MAX1982EUT-T is 2.7V to 5.5V. Operating the device outside of this range may affect its performance and reliability. It's recommended to use a voltage regulator or a voltage supervisor to ensure the input voltage remains within the recommended range.
MAX1982EUT-T datasheet
by Maxim Integrated Products
Findchips
