The recommended layout and placement for the MAX1714AEEP+ involves keeping the input capacitors close to the VIN pin, and the output capacitors close to the VOUT pin. The device should be placed near the power source, and the output voltage sense lines should be routed away from noisy signals.
To ensure stability and prevent oscillations, it is recommended to use a minimum output capacitance of 10uF, and to place a 1uF capacitor between the VFB pin and GND. Additionally, the output voltage sense lines should be routed away from noisy signals, and the device should be decoupled from the power source with a 1uF capacitor.
The maximum input voltage that the MAX1714AEEP+ can handle is 28V. Exceeding this voltage may damage the device.
The output voltage of the MAX1714AEEP+ can be adjusted by connecting a resistor divider network between the VOUT pin and the VFB pin. The output voltage is determined by the ratio of the resistors in the divider network.
The maximum output current that the MAX1714AEEP+ can deliver is 1.5A. Exceeding this current may cause the device to overheat or fail.
MAX1714AEEP+ datasheet
by Maxim Integrated Products
Findchips
