The recommended layout and placement for the MAX16800ATE+ can be found in the Maxim Integrated Products' application note AN5121, which provides guidelines for PCB layout, component placement, and thermal management to ensure optimal performance and reliability.
The MAX16800ATE+ can be configured for different input voltage ranges by adjusting the values of the external resistors RSET and RFB. The datasheet provides a formula to calculate the required resistor values based on the desired input voltage range.
The maximum output current capability of the MAX16800ATE+ is 1A, but it can be limited by the external components, such as the inductor and output capacitor, as well as the thermal performance of the PCB. It's recommended to check the thermal performance and component selection to ensure the desired output current is achieved.
The MAX16800ATE+ has a built-in overcurrent protection feature that can be enabled by connecting the OC pin to a resistor divider network. The datasheet provides a formula to calculate the required resistor values based on the desired overcurrent threshold.
The recommended input capacitor type for the MAX16800ATE+ is a low-ESR ceramic capacitor with a value of 10uF to 22uF. The input capacitor should be placed as close as possible to the VIN pin to minimize noise and ensure stable operation.
MAX16800ATE+ datasheet
by Maxim Integrated Products
