To minimize EMI and ensure reliable operation, it is recommended to follow a star-grounding scheme, keep the analog and digital grounds separate, and use a solid ground plane. Additionally, keep the input and output traces short and away from each other, and use a common-mode choke or ferrite bead on the input lines.
The MAX1487EESA+ requires a single 5V power supply. Ensure that the power supply is clean and well-regulated, and that the voltage is within the recommended operating range. Power sequencing is not critical, but it is recommended to power up the device after the input signals are stable.
The maximum cable length recommended for use with the MAX1487EESA+ is 10 meters (33 feet) of Category 5e or higher cable. It is recommended to use a shielded twisted-pair cable to minimize EMI and ensure reliable operation.
To troubleshoot common issues with the MAX1487EESA+, first check the power supply and ensure it is within the recommended operating range. Then, check the input signals and ensure they are within the recommended range. If the issue persists, check the output load and ensure it is within the recommended range. If the issue still persists, check for any signs of physical damage or overheating.
The MAX1487EESA+ has a maximum junction temperature of 150°C. To ensure reliable operation, it is recommended to keep the device temperature below 125°C. Use a heat sink or thermal pad if necessary, and ensure good airflow around the device.
MAX1487EESA+ datasheet
by Maxim Integrated Products
Findchips
