The recommended PCB layout for the MAX14753EUE+ involves placing the device near the power source, using a solid ground plane, and keeping the input and output traces short and separate to minimize noise and EMI.
To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF, and to place the capacitor close to the output pin. Additionally, the output voltage can be stabilized by adding a 10nF capacitor in parallel with a 10kΩ resistor between the output pin and the feedback pin.
The maximum input voltage that the MAX14753EUE+ can handle is 28V. Exceeding this voltage may damage the device.
The output voltage of the MAX14753EUE+ can be calculated using the formula: Vout = (R1/R2) * (Vref), where R1 and R2 are the resistors in the feedback network, and Vref is the internal reference voltage (1.25V).
The thermal shutdown temperature of the MAX14753EUE+ is 150°C. The device will shut down if the junction temperature exceeds this value.
MAX14753EUE+ datasheet
by Maxim Integrated Products
