MAX14508EEVB+ datasheet by Maxim Integrated Products

MAX14508EEVB+ Frequently Asked Questions (FAQs)

• What is the power supply requirement for the MAX14508EEVB+?
  The MAX14508EEVB+ requires a single 3.3V power supply, which can be provided through the USB connector or an external power source.
• How do I configure the MAX14508EEVB+ for different interface modes?
  The MAX14508EEVB+ can be configured for different interface modes (e.g., I2C, SPI, UART) using the onboard jumpers and resistors. Refer to the evaluation board manual for specific configuration details.
• What is the maximum data transfer rate supported by the MAX14508EEVB+?
  The MAX14508EEVB+ supports data transfer rates up to 100Mbps in SPI mode and 400kHz in I2C mode.
• Can I use the MAX14508EEVB+ with a 5V power supply?
  No, the MAX14508EEVB+ is designed to operate with a 3.3V power supply. Using a 5V power supply may damage the device.
• How do I access the internal registers of the MAX14508EEVB+?
  The internal registers of the MAX14508EEVB+ can be accessed using the I2C or SPI interface. Refer to the datasheet for register address and bit definitions.