The recommended layout and placement for the MAX11665AUT+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources to minimize noise. Additionally, it's recommended to use a 4-layer PCB with a dedicated analog power plane and a dedicated digital power plane.
To optimize the performance of the MAX11665AUT+T in noisy environments, use a low-pass filter at the input, use a shielded cable for the analog input, and consider using a common-mode filter or a differential amplifier to reject common-mode noise. Additionally, ensure that the device is properly decoupled and that the power supply is clean and stable.
The maximum clock frequency that can be used with the MAX11665AUT+T is 50 MHz. However, the actual clock frequency used may be limited by the specific application and the quality of the clock signal.
Yes, the MAX11665AUT+T can be used in a multi-channel application. The device has a serial interface that allows multiple devices to be connected to a single microcontroller, making it suitable for multi-channel applications.
The power-on reset (POR) timing for the MAX11665AUT+T is typically around 10 ms, but this can vary depending on the specific application and the power supply used. It's recommended to consult the datasheet and application notes for more information.
MAX11665AUT+T datasheet
by Maxim Integrated Products
Findchips
