M80-5000000M1-05-331-00-000 datasheet by Harwin

M80-5000000M1-05-331-00-000 Frequently Asked Questions (FAQs)

• What is the recommended torque for the screw locks on the M80 connector?
  The recommended torque for the screw locks on the M80 connector is 0.5 Nm to 1.5 Nm, as specified in the Harwin application notes.
• Can I use the M80 connector in high-vibration applications?
  Yes, the M80 connector is designed to withstand high-vibration environments, with a tested vibration resistance of 10-2000 Hz, 10G peak acceleration, as per IEC 61373 Cat 2.
• Is the M80 connector suitable for use in harsh environments, such as high-temperature or humid conditions?
  Yes, the M80 connector is designed to operate in harsh environments, with an operating temperature range of -40°C to +125°C and a humidity rating of 95% RH at 40°C, as per IEC 60529 IP67.
• Can I use the M80 connector with wire sizes other than the recommended AWG 24-30?
  While the M80 connector is optimized for use with AWG 24-30 wires, it can be used with other wire sizes, but this may affect the connector's performance and reliability. Consult Harwin's application notes for guidance on using alternative wire sizes.
• Are the M80 connectors compatible with other manufacturers' connectors?
  The M80 connector is designed to be compatible with other manufacturers' connectors that meet the IEC 61076-3-103 standard. However, compatibility should be verified through testing and validation before use in a specific application.