M74HC4075M1R datasheet by STMicroelectronics

M74HC4075M1R Frequently Asked Questions (FAQs)

• What is the recommended operating voltage range for M74HC4075M1R?
  The recommended operating voltage range for M74HC4075M1R is 2V to 6V, with a typical voltage of 5V.
• How do I handle the unused inputs of the M74HC4075M1R?
  Unused inputs of the M74HC4075M1R should be connected to VCC or GND through a pull-up or pull-down resistor to prevent floating inputs and ensure proper operation.
• What is the maximum frequency of operation for M74HC4075M1R?
  The maximum frequency of operation for M74HC4075M1R is typically around 25 MHz, but this can vary depending on the specific application and operating conditions.
• How do I ensure that the M74HC4075M1R is properly powered?
  To ensure proper powering of the M74HC4075M1R, a decoupling capacitor of 0.1uF to 1uF should be placed close to the VCC pin, and the power supply should be stable and free of noise.
• Can I use the M74HC4075M1R in a 3.3V system?
  Yes, the M74HC4075M1R can be used in a 3.3V system, but the output voltage will be limited to around 3.3V, and the device may not operate at its full speed.