Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img M74HC393B1R datasheet by STMicroelectronics

    • DUAL BINARY COUNTER
    • Original
    • Yes
    • Yes
    • Obsolete
    • 8542.39.00.01
    • Find it at Findchips.com

    M74HC393B1R datasheet preview

    M74HC393B1R Frequently Asked Questions (FAQs)

    • The recommended operating voltage range for M74HC393B1R is 2V to 6V, with a typical voltage of 5V.
    • To ensure correct power sequencing, apply power to the VCC pin before applying any input signals, and ensure that the power supply is stable before enabling the clock input.
    • The maximum clock frequency that M74HC393B1R can handle is 30 MHz, but this can vary depending on the operating voltage and load capacitance.
    • Yes, M74HC393B1R can be used in a 3.3V system, but the output voltage will be limited to 3.3V, and the device may not operate at the maximum clock frequency.
    • The asynchronous reset input (MR) should be tied to VCC through a pull-up resistor or connected to a reset signal that is active-low. This input should not be left floating.
    Price & Stock Powered by Findchips Logo
    Supplyframe Tracking Pixel