LTC3880 - IC 0.1 A DUAL SWITCHING CONTROLLER, 1000 kHz SWITCHING FREQ-MAX, PQCC40, 6 X 6 MM, LEAD FREE, PLASTIC, WJJD-2, QFN-40, Switching Regulator or Controller
The maximum input voltage that can be applied to the LTC3880EUJ-1#TRPBF is 14V. Exceeding this voltage can cause damage to the device.
The output voltage of the LTC3880EUJ-1#TRPBF can be configured by connecting a resistor divider network between the output voltage pin (VOUT) and the ground pin (GND). The ratio of the resistors determines the output voltage. Refer to the datasheet for the specific resistor values required for the desired output voltage.
The maximum output current that the LTC3880EUJ-1#TRPBF can deliver is 3.5A. However, the actual output current may be limited by the input voltage, output voltage, and thermal considerations.
The LTC3880EUJ-1#TRPBF has an enable pin (EN) that can be used to enable or disable the device. Connecting the EN pin to a logic high (e.g., 3.3V or 5V) enables the device, while connecting it to a logic low (e.g., GND) disables the device.
The power dissipation of the LTC3880EUJ-1#TRPBF depends on the input voltage, output voltage, and output current. The datasheet provides a power dissipation calculation formula and a thermal derating curve to help estimate the power dissipation under different operating conditions.
LTC3880EUJ-1#TRPBF datasheet
by Linear Technology
Findchips
