The recommended layout and placement for the LTC2657BIFE-L16#PBF can be found in the Linear Technology application note AN140 'LTC2657 Layout and Thermal Considerations'. It is essential to follow the recommended layout to ensure proper thermal performance and to minimize noise and electromagnetic interference (EMI).
The output voltage of the LTC2657BIFE-L16#PBF can be set using the VOUT pin. The recommended output voltage range is 0.5V to 5.5V. To select the correct output voltage, refer to the datasheet's VOUT pin description and the output voltage selection table. Additionally, consider the input voltage, output current, and power dissipation requirements of your application.
The maximum input voltage that the LTC2657BIFE-L16#PBF can handle is 6V. Exceeding this voltage may damage the device. It is essential to ensure that the input voltage does not exceed the maximum rating, and to add input voltage protection if necessary.
To ensure the LTC2657BIFE-L16#PBF is stable and does not oscillate, follow the recommended layout and placement guidelines, use a sufficient output capacitor (COUT) with a low equivalent series resistance (ESR), and add a small ceramic capacitor (CCOMP) between the VOUT and GND pins. Additionally, ensure that the input voltage is within the recommended range and that the device is operated within its specified temperature range.
The typical power dissipation of the LTC2657BIFE-L16#PBF depends on the input voltage, output voltage, and output current. Refer to the datasheet's power dissipation calculation formula and thermal resistance (θJA) to estimate the power dissipation for your specific application. Ensure that the device is operated within its specified temperature range and that proper thermal management is implemented.
LTC2657BIFE-L16#PBF datasheet
by Linear Technology
Findchips
