Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img LTC1650CN#PBF datasheet by Linear Technology

    • Low Glitch 16-Bit Voltage Output DAC; Package: PDIP; No of Pins: 16; Temperature Range: 0°C to +70°C
    • Original
    • Yes
    • Unknown
    • Transferred
    • 8542.39.00.01
    • 8542.39.00.00
    • Powered by Findchips Logo Findchips

    LTC1650CN#PBF datasheet preview

    LTC1650CN#PBF Frequently Asked Questions (FAQs)

    • The recommended layout and placement for the LTC1650CN involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the analog signal sources. Additionally, it's recommended to use a low-ESR capacitor for the VCC bypass and to keep the input and output traces short and direct.
    • To ensure accurate temperature measurement with the LTC1650CN, it's essential to calibrate the device, use a high-accuracy voltage reference, and minimize thermal gradients on the PCB. Additionally, the device should be placed close to the temperature sensor, and the sensor should be thermally connected to the device being measured.
    • The maximum clock frequency that can be used with the LTC1650CN is 50MHz. However, the actual clock frequency used may be limited by the specific application and the required conversion time.
    • Yes, the LTC1650CN can be used in a multi-channel configuration by using multiple devices or by using a multiplexer to connect multiple channels to a single device. However, the specific implementation will depend on the application requirements and the desired level of channel independence.
    • The digital output data from the LTC1650CN is typically handled by a microcontroller or a digital signal processor. The data can be read using a serial interface, such as SPI or I2C, and then processed and stored as required by the application.
    Supplyframe Tracking Pixel