The maximum power dissipation of the LT6220CS5 is 1.4W, assuming a 5-pin TSOT package and a maximum junction temperature of 150°C.
To optimize the layout for the LT6220CS5, keep the input and output traces short and away from each other, use a solid ground plane, and place the bypass capacitors close to the device.
The recommended input capacitance for the LT6220CS5 is 10nF to 100nF, depending on the input frequency and desired noise rejection.
Yes, the LT6220CS5 can be used in a single-supply application, but the input common-mode range is limited to VCC - 1.5V to VCC + 0.5V, and the output swing is reduced.
To reduce noise and oscillations in the LT6220CS5, use a low-ESR bypass capacitor, keep the input and output traces short and away from each other, and use a ferrite bead or series resistor to dampen oscillations.