LT3468ES5-1#TRPBF datasheet by Linear Technology

LT3468ES5-1#TRPBF Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LT3468ES5-1#TRPBF?
  The maximum input voltage that can be applied to the LT3468ES5-1#TRPBF is 42V, but it's recommended to keep it below 36V for reliable operation.
• How do I ensure the stability of the output voltage in the LT3468ES5-1#TRPBF?
  To ensure the stability of the output voltage, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, ensure that the input voltage is within the recommended range and the output current is within the specified limits.
• What is the maximum output current that the LT3468ES5-1#TRPBF can deliver?
  The maximum output current that the LT3468ES5-1#TRPBF can deliver is 1.5A, but it's recommended to keep it below 1.2A for reliable operation and to prevent overheating.
• How do I calculate the output voltage of the LT3468ES5-1#TRPBF?
  The output voltage of the LT3468ES5-1#TRPBF can be calculated using the formula: Vout = (R1/R2) * (Vfb - Vref), where R1 and R2 are the feedback resistors, Vfb is the feedback voltage, and Vref is the reference voltage.
• What is the purpose of the EN pin on the LT3468ES5-1#TRPBF?
  The EN (enable) pin on the LT3468ES5-1#TRPBF is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.