LT1767EMS8E datasheet by Linear Technology

LT1767EMS8E Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LT1767EMS8E?
  The maximum input voltage that can be applied to the LT1767EMS8E is 36V, but it's recommended to keep it below 30V for reliable operation.
• How do I ensure the stability of the output voltage in the LT1767EMS8E?
  To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, keep the input and output capacitors close to the IC to minimize noise and oscillations.
• What is the maximum output current that the LT1767EMS8E can deliver?
  The maximum output current that the LT1767EMS8E can deliver is 3A, but it's recommended to keep it below 2.5A for reliable operation and to prevent overheating.
• How do I adjust the output voltage of the LT1767EMS8E?
  The output voltage of the LT1767EMS8E can be adjusted by using a resistive divider network between the output and the ADJ pin. The output voltage is determined by the ratio of the resistors and the internal reference voltage.
• What is the purpose of the EN pin in the LT1767EMS8E?
  The EN (enable) pin is used to turn the regulator on or off. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled and the output is turned off.