LT1763CS8#TRPBF datasheet by Linear Technology

LT1763CS8#TRPBF Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the LT1763CS8#TRPBF can handle?
  The maximum input voltage that the LT1763CS8#TRPBF can handle is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
• How do I ensure the stability of the output voltage in my design?
  To ensure stability, make sure to follow the recommended layout and component selection guidelines in the datasheet, and use a minimum output capacitance of 10uF with an ESR of 0.1 ohms or less.
• What is the maximum output current that the LT1763CS8#TRPBF can provide?
  The maximum output current that the LT1763CS8#TRPBF can provide is 3A, but it's recommended to derate the output current based on the ambient temperature and the input voltage to ensure reliable operation.
• How do I adjust the output voltage of the LT1763CS8#TRPBF?
  The output voltage of the LT1763CS8#TRPBF can be adjusted by using a resistive divider network between the output and the adjust pin, with the ratio of the resistors determining the output voltage.
• What is the purpose of the EN pin on the LT1763CS8#TRPBF?
  The EN (enable) pin is used to turn the regulator on or off. When the EN pin is pulled low, the regulator is shut down and the output voltage is disabled.