LT1568CGN#PBF datasheet by Linear Technology

LT1568CGN#PBF Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the LT1568CGN#PBF can handle?
  The maximum input voltage that the LT1568CGN#PBF can handle is 15V, but it's recommended to keep it below 12V for optimal performance and reliability.
• How do I ensure the stability of the output voltage in my design?
  To ensure stability, make sure to follow the recommended layout and component selection guidelines in the datasheet, and use a minimum output capacitance of 10uF with an ESR of 0.1 ohms or less.
• What is the maximum output current that the LT1568CGN#PBF can provide?
  The maximum output current that the LT1568CGN#PBF can provide is 3A, but it's recommended to keep it below 2.5A for optimal performance and reliability.
• How do I adjust the output voltage of the LT1568CGN#PBF?
  The output voltage of the LT1568CGN#PBF can be adjusted by using a resistive divider network between the output and the adjust pin, with the ratio of the resistors determining the output voltage.
• What is the purpose of the 'EN' pin on the LT1568CGN#PBF?
  The 'EN' pin is an active-high enable input that allows the user to turn the regulator on and off. When the 'EN' pin is pulled low, the regulator is shut down and the output is disconnected from the input.