LT1210CR datasheet by Linear Technology

LT1210CR Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the LT1210CR can handle?
  The LT1210CR can handle input voltages up to 36V, but it's recommended to keep it below 30V for optimal performance and reliability.
• How do I ensure the stability of the output voltage?
  To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, use a low-ESR capacitor for the input filter capacitor (Cin).
• What is the maximum output current that the LT1210CR can provide?
  The LT1210CR can provide up to 3A of output current, but it's recommended to keep it below 2.5A for optimal performance and reliability.
• How do I adjust the output voltage?
  The output voltage can be adjusted by using a resistive divider network between the output and the feedback pin (FB). The ratio of the resistors determines the output voltage.
• What is the purpose of the EN (enable) pin?
  The EN pin is used to enable or disable the regulator. When the EN pin is pulled low, the regulator is shut down, and when it's pulled high, the regulator is enabled.