Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img LT1014MJB datasheet by Texas Instruments

    • LT1014 - Quad Precision Operational Amplifier 14-CDIP -55 to 125
    • Original
    • No
    • Yes
    • Active
    • EAR99
    • 8542.33.00.01
    • 8542.33.00.00
    • Powered by Findchips Logo Findchips

    LT1014MJB datasheet preview

    LT1014MJB Frequently Asked Questions (FAQs)

    • The maximum power dissipation of the LT1014MJB is 670mW, which is calculated based on the maximum junction temperature (150°C) and thermal resistance (125°C/W) specified in the datasheet.
    • To ensure stability, add a 10-22nF capacitor in parallel with a 1-2kΩ resistor between the output and the inverting input. This helps to compensate for the op-amp's internal capacitance and ensures stability.
    • Use a star-grounding technique, where all grounds are connected to a single point. Keep the input and output traces short and separate, and avoid running them parallel to each other. Use a ground plane to minimize noise and radiation.
    • While the LT1014MJB can be used as a comparator, it's not the best choice due to its relatively slow slew rate (0.5V/μs) and limited bandwidth (1.5MHz). Consider using a dedicated comparator like the LM339 or LM2901 for comparator applications.
    • Use ESD protection devices like TVS diodes or ESD arrays on the input and output pins to protect the LT1014MJB from electrostatic discharge. Follow proper PCB layout and handling practices to minimize ESD risks.
    Supplyframe Tracking Pixel