LPC4078FBD208 datasheet by NXP Semiconductors

LPC4078FBD208 Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for the LPC4078FBD208?
  The maximum operating temperature range for the LPC4078FBD208 is -40°C to +105°C, as specified in the datasheet. However, it's recommended to operate within -20°C to +85°C for optimal performance and reliability.
• How do I configure the clock settings for the LPC4078FBD208?
  The clock settings for the LPC4078FBD208 can be configured using the Clock Generation Unit (CGU) registers. The CGU provides a flexible clock generation system that allows you to configure the clock sources, dividers, and multipliers to generate the desired clock frequencies for the CPU, peripherals, and other components.
• What is the maximum current consumption of the LPC4078FBD208?
  The maximum current consumption of the LPC4078FBD208 depends on the operating frequency, voltage, and peripheral usage. According to the datasheet, the typical current consumption is around 130 mA at 100 MHz, 3.3 V, and 25°C. However, this value can vary depending on the specific application and usage.
• How do I implement low-power modes on the LPC4078FBD208?
  The LPC4078FBD208 has several low-power modes, including Sleep, Deep Sleep, and Power-Down modes. These modes can be implemented using the Power Management Controller (PMC) registers. The PMC allows you to configure the power modes, clock gating, and voltage scaling to minimize power consumption and optimize system performance.
• What is the maximum flash memory endurance of the LPC4078FBD208?
  The maximum flash memory endurance of the LPC4078FBD208 is 100,000 erase/write cycles, as specified in the datasheet. However, this value can vary depending on the operating conditions, programming methods, and data retention requirements.