The maximum clock frequency for the LPC2136FBD64/01 is 60 MHz, but it can be overclocked up to 70 MHz with some limitations. However, it's essential to ensure that the system design and components can handle the increased frequency.
The pin multiplexing on the LPC2136FBD64/01 can be configured using the PINSELx registers. These registers allow you to select the function of each pin, such as GPIO, UART, SPI, or other peripherals. Consult the datasheet and user manual for specific register settings and pin configurations.
The minimum voltage required for the LPC2136FBD64/01 to operate is 2.4V, but it's recommended to use a voltage regulator to maintain a stable 3.3V supply for optimal performance and reliability.
The ADC on the LPC2136FBD64/01 can be used by configuring the ADC registers, such as ADCR, ADGDR, and ADSTAT. You'll need to select the ADC clock, set the conversion mode, and enable the ADC interrupts. Consult the datasheet and user manual for specific register settings and conversion sequences.
Yes, the LPC2136FBD64/01 can be used with an external crystal oscillator. You'll need to connect the crystal to the XTAL1 and XTAL2 pins and configure the PLL to use the external clock source. Consult the datasheet and user manual for specific configuration and timing requirements.
LPC2136FBD64/01 datasheet
by NXP Semiconductors
