LPC1765FBD100 datasheet by NXP Semiconductors

LPC1765FBD100 Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that can be achieved with the internal oscillator?
  The maximum clock frequency that can be achieved with the internal oscillator is 25 MHz. However, it's recommended to use an external crystal oscillator for frequencies above 12 MHz for better accuracy and stability.
• How do I configure the pin multiplexing to use the desired peripherals?
  The pin multiplexing can be configured using the PINSELx registers. Each peripheral function has a specific pin assignment, and the PINSELx registers allow you to select the desired peripheral function for each pin. Refer to the user manual and the datasheet for the specific pin assignments and register settings.
• What is the maximum current that can be sourced or sunk by the GPIO pins?
  The maximum current that can be sourced or sunk by the GPIO pins is 4 mA. However, it's recommended to limit the current to 2 mA or less to ensure reliable operation and to prevent overheating.
• How do I implement a bootloader using the LPC1765FBD100?
  A bootloader can be implemented using the ISP (In-System Programming) mode of the LPC1765FBD100. The ISP mode allows the microcontroller to be programmed using a serial interface. You can use a bootloader library or implement your own bootloader using the ISP protocol. Refer to the user manual and the datasheet for more information.
• What is the power consumption of the LPC1765FBD100 in different operating modes?
  The power consumption of the LPC1765FBD100 varies depending on the operating mode. In active mode, the power consumption is around 100 mA/MHz. In sleep mode, the power consumption is around 10 uA, and in deep sleep mode, it's around 1 uA. Refer to the datasheet for more detailed power consumption information.