The maximum input voltage that can be applied to the LP3882EMR-1.2/NOPB is 15V, but it's recommended to keep it below 12V for optimal performance and to prevent damage to the device.
To ensure stability of the output voltage, it's essential to use a suitable output capacitor with a minimum value of 10uF and an ESR (Equivalent Series Resistance) of less than 1 ohm. Additionally, the input capacitor should be at least 1uF with an ESR of less than 1 ohm.
The minimum input voltage required for the LP3882EMR-1.2/NOPB to operate is 2.5V, but it's recommended to keep it above 3V for optimal performance.
The LP3882EMR-1.2/NOPB is rated for operation up to 125°C, but it's essential to ensure that the device is properly heatsinked and that the junction temperature is kept below 150°C to prevent damage.
The output voltage of the LP3882EMR-1.2/NOPB is fixed at 1.2V, and it's not adjustable. However, you can use an external resistor divider network to create a different output voltage, but this is not recommended as it may affect the device's performance and stability.
LP3882EMR-1.2/NOPB datasheet
by Texas Instruments
Findchips
