The maximum output power of LNK616PG is dependent on the input voltage, output voltage, and current. However, as a general guideline, it can deliver up to 16W of output power with an input voltage range of 85-265VAC.
To ensure safe operation, it's essential to provide adequate heat sinking and thermal management. The device has a maximum junction temperature of 150°C. Ensure that the PCB design and layout allow for good airflow, and consider using a heat sink if necessary.
The recommended input capacitor value is 1-2uF, X-cap or Y-cap type, with a voltage rating of at least 250VAC. The capacitor should be placed as close as possible to the input pins of the LNK616PG.
To optimize output voltage regulation, ensure that the output capacitor value is within the recommended range (4.7-10uF), and the output voltage sense resistors are correctly selected. Additionally, consider using a voltage feedback resistor network to improve regulation.
To minimize EMI and ensure EMC compliance, follow proper PCB layout guidelines, use a shielded transformer, and consider adding EMI filters or common-mode chokes. Ensure that the device is placed in a metal enclosure, and follow the recommended layout and grounding guidelines.