Texas Instruments provides a recommended PCB layout in the datasheet, but it's also important to follow general best practices for high-frequency PCB design, such as using a solid ground plane, minimizing trace lengths, and using bypass capacitors to decouple the power supply.
The choice of input and output capacitors depends on the specific application and operating conditions. In general, X7R or X5R ceramic capacitors with a voltage rating of at least 2x the input voltage are recommended. The capacitance value should be chosen based on the desired cutoff frequency and impedance matching requirements.
The LMP7707MAX/NOPB is rated for operation from -40°C to 125°C, but the maximum operating temperature range may be limited by the specific application and operating conditions. It's important to ensure that the device is operated within its recommended operating conditions to ensure reliability and performance.
To ensure EMC, it's important to follow proper PCB design and layout practices, such as using a solid ground plane, minimizing trace lengths, and using shielding and filtering components as needed. Additionally, the device should be operated within its recommended operating conditions, and proper ESD protection should be implemented.
The recommended power-up sequence for the LMP7707MAX/NOPB is to apply the power supply voltage (VCC) before applying the input signal. This ensures that the device is properly biased and configured before the input signal is applied.
LMP7707MAX/NOPB datasheet
by Texas Instruments
Findchips
