LM96063CISDX/NOPB datasheet by Texas Instruments

LM96063CISDX/NOPB Frequently Asked Questions (FAQs)

• What is the recommended PCB layout for optimal thermal performance?
  A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the thermal pad connected to the ground plane to improve heat dissipation.
• How do I ensure stability with a high-gain configuration?
  Use a compensation network with a series RC network (Rc and Cc) to ensure stability. The values of Rc and Cc can be calculated using the datasheet's stability analysis section.
• What is the maximum capacitive load that can be driven by the LM96063CISDX/NOPB?
  The maximum capacitive load is 10nF. Exceeding this value may cause oscillations or instability. Use a series resistor to limit the capacitive load if necessary.
• How do I protect the device from overvoltage and undervoltage conditions?
  Use a voltage supervisor or a power-on reset circuit to detect overvoltage and undervoltage conditions. Add a TVS diode or a zener diode to clamp the input voltage to a safe level.
• What is the recommended input capacitor value and type for optimal performance?
  Use a low-ESR ceramic capacitor (X5R or X7R) with a value between 1uF to 10uF, depending on the input voltage and output current requirements.