LM5085MYE/NOPB datasheet by Texas Instruments

LM5085MYE/NOPB Frequently Asked Questions (FAQs)

• What is the maximum input voltage that the LM5085MYE/NOPB can handle?
  The maximum input voltage is 60V, but it's recommended to keep it below 50V for reliable operation.
• How do I ensure the stability of the output voltage?
  To ensure stability, make sure to use a minimum output capacitance of 10uF, and a maximum ESR of 1 ohm. Also, use a low-ESR ceramic capacitor for the output filter capacitor.
• What is the maximum output current that the LM5085MYE/NOPB can provide?
  The maximum output current is 5A, but it's recommended to keep it below 4A for reliable operation and to prevent overheating.
• How do I calculate the output voltage of the LM5085MYE/NOPB?
  The output voltage can be calculated using the formula: Vout = (R1 / R2) x 0.8V, where R1 and R2 are the resistors used in the feedback network.
• What is the purpose of the EN pin on the LM5085MYE/NOPB?
  The EN (enable) pin is used to turn the regulator on or off. When EN is high, the regulator is enabled, and when EN is low, the regulator is disabled.