Texas Instruments recommends a star-grounded layout with a single-point ground connection to minimize noise and ensure stability. A dedicated ground plane and short, direct traces to the input and output pins are also recommended.
The LM4040BIM7X-2.5/NOPB has a thermal shutdown feature that activates when the junction temperature exceeds 150°C. To prevent overheating, ensure good airflow, use a heat sink if necessary, and avoid high-power dissipation in adjacent components.
A 1-10μF ceramic or film capacitor with a voltage rating of at least 10V is recommended for input decoupling. The capacitor should be placed as close as possible to the input pin to minimize noise and ensure stability.
Yes, the LM4040BIM7X-2.5/NOPB is qualified for automotive and high-reliability applications. It meets the requirements of the AEC-Q100 standard and is manufactured using a robust process to ensure high reliability and low defect rates.
Follow the recommended soldering profile and assembly guidelines provided in the datasheet. Ensure the device is handled and stored in an ESD-safe environment, and use a soldering iron with a temperature-controlled tip to prevent overheating.
LM4040BIM7X-2.5/NOPB datasheet
by Texas Instruments
Findchips
