LM393MX/NOPB datasheet by Texas Instruments

LM393MX/NOPB Frequently Asked Questions (FAQs)

• What is the maximum voltage that can be applied to the input pins?
  The maximum voltage that can be applied to the input pins is the supply voltage (Vcc) + 0.3V. Exceeding this voltage can cause damage to the device.
• How do I ensure that the comparator output is not oscillating?
  To prevent oscillation, ensure that the input signals are properly filtered and decoupled, and that the output is properly terminated. Additionally, adding a small capacitor (e.g. 10nF) between the output and ground can help to reduce oscillations.
• What is the minimum input voltage required for the comparator to function correctly?
  The minimum input voltage required for the comparator to function correctly is typically around 1.5V to 2V, depending on the specific application and noise conditions.
• Can I use the LM393MX/NOPB as a voltage regulator?
  No, the LM393MX/NOPB is a comparator, not a voltage regulator. It is designed to compare two input voltages and output a digital signal, not to regulate voltage.
• How do I choose the correct pull-up resistor value for the output?
  The pull-up resistor value depends on the specific application and the load connected to the output. A general rule of thumb is to choose a value between 1kΩ to 10kΩ, but this may need to be adjusted based on the specific requirements of the application.