LM3526M-L datasheet by Texas Instruments

LM3526M-L Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LM3526M-L?
  The maximum input voltage that can be applied to the LM3526M-L is 40V, but it's recommended to keep it below 30V for reliable operation.
• How do I ensure the LM3526M-L operates within its safe operating area (SOA)?
  To ensure the LM3526M-L operates within its SOA, make sure to keep the input voltage, output current, and power dissipation within the recommended limits specified in the datasheet.
• What is the purpose of the EN (enable) pin on the LM3526M-L?
  The EN pin is used to enable or disable the regulator. When the EN pin is high, the regulator is enabled, and when it's low, the regulator is disabled.
• Can I use the LM3526M-L as a high-current regulator?
  While the LM3526M-L can handle high currents, it's not recommended for high-current applications. The maximum output current is 3A, and exceeding this limit can cause overheating and damage to the device.
• How do I choose the correct output capacitor for the LM3526M-L?
  Choose an output capacitor with a value between 10uF to 100uF, and a voltage rating that's at least 1.5 times the output voltage. A low-ESR capacitor is recommended to minimize voltage ripple.