The maximum input voltage that can be applied to the LM2672LD-ADJ/NOPB is 40V. Exceeding this voltage can cause damage to the device.
The output voltage of the LM2672LD-ADJ/NOPB can be adjusted by connecting a resistive divider network between the output pin and the adjust pin. The ratio of the resistors determines the output voltage.
The minimum input voltage required for the LM2672LD-ADJ/NOPB to operate is 7.5V. The device will not regulate the output voltage properly if the input voltage is below this threshold.
The LM2672LD-ADJ/NOPB is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. It's recommended to derate the output current and input voltage at high temperatures.
To ensure the stability of the LM2672LD-ADJ/NOPB output voltage, it's recommended to use a minimum output capacitance of 22uF and an ESR of less than 1 ohm. Additionally, the input capacitor should be at least 10uF with an ESR of less than 1 ohm.
LM2672LD-ADJ/NOPB datasheet
by Texas Instruments
