LM2574M-5.0/NOPB datasheet by Texas Instruments

LM2574M-5.0/NOPB Frequently Asked Questions (FAQs)

• What is the maximum input voltage that can be applied to the LM2574M-5.0/NOPB?
  The maximum input voltage that can be applied to the LM2574M-5.0/NOPB is 40V. Exceeding this voltage can cause damage to the device.
• How do I ensure the stability of the output voltage?
  To ensure the stability of the output voltage, it is recommended to use a minimum output capacitance of 10uF with an ESR of less than 1 ohm. Additionally, the output voltage can be further stabilized by adding a 10nF capacitor between the output and ground.
• What is the maximum output current that the LM2574M-5.0/NOPB can provide?
  The maximum output current that the LM2574M-5.0/NOPB can provide is 1A. Exceeding this current can cause the device to overheat and potentially fail.
• How do I calculate the input capacitor value for the LM2574M-5.0/NOPB?
  The input capacitor value can be calculated using the formula: CIN = (IOUT x ΔI) / (f x ΔV), where CIN is the input capacitance, IOUT is the output current, ΔI is the input ripple current, f is the switching frequency, and ΔV is the input voltage ripple.
• What is the purpose of the feedback pin (FB) on the LM2574M-5.0/NOPB?
  The feedback pin (FB) is used to sense the output voltage and regulate it to the desired value. The FB pin is connected to the output voltage through a resistive divider network, which sets the output voltage.