STMicroelectronics recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
To ensure stable output voltage regulation, it's essential to follow the recommended input and output capacitor values and types, as well as the suggested PCB layout. Additionally, ensure that the input voltage is within the recommended range and that the device is operated within its specified temperature range.
The maximum allowed input voltage ripple for the LD1580P2T-R is 1V peak-to-peak. Exceeding this value may affect the regulator's performance and stability.
While the LD1580P2T-R is rated for operation up to 150°C, it's essential to consider the device's power dissipation and thermal management when operating in high-temperature environments. Ensure that the device is properly heatsinked and that the junction temperature (Tj) does not exceed 150°C.
To protect the regulator from input voltage surges or spikes, consider adding a transient voltage suppressor (TVS) diode or a voltage clamp circuit at the input. This will help absorb or clamp voltage transients, ensuring the regulator's input voltage remains within its specified range.
LD1580P2T-R datasheet
by STMicroelectronics
Findchips
Findchips