L6228DTR datasheet by STMicroelectronics

L6228DTR Frequently Asked Questions (FAQs)

• What is the maximum operating temperature range for the L6228DTR?
  The L6228DTR can operate from -40°C to 150°C, but the maximum junction temperature (TJ) should not exceed 150°C.
• How do I ensure the L6228DTR is properly powered on?
  To ensure proper power-on, the VCC pin should be powered up before the VIN pin, and the EN pin should be high. Also, the input voltage (VIN) should be within the recommended range (8V to 40V).
• What is the recommended PCB layout for the L6228DTR?
  A good PCB layout for the L6228DTR should have a solid ground plane, keep the high-current paths short and wide, and use a decoupling capacitor (e.g., 100nF) close to the VCC pin.
• How do I choose the right inductor for the L6228DTR?
  Choose an inductor with a high saturation current rating, low DC resistance, and a suitable inductance value (e.g., 10uH to 22uH) based on the application's requirements.
• What is the purpose of the EN pin on the L6228DTR?
  The EN (enable) pin is used to turn the device on or off. When EN is high, the device is enabled, and when EN is low, the device is disabled and in shutdown mode.