Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img ITA10B1 datasheet by STMicroelectronics

    • BIDIRECTIONAL TRANSIL ARRAY FOR DATALINE PROTECTI
    • Original
    • Yes
    • Unknown
    • Obsolete
    • EAR99
    • 8541.10.00.50
    • Powered by Findchips Logo Findchips

    ITA10B1 datasheet preview

    ITA10B1 Frequently Asked Questions (FAQs)

    • A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a thermal pad or a heat sink to ensure good heat dissipation.
    • Ensure proper thermal management, use a heat sink if necessary, and follow the recommended PCB layout guidelines. Also, consider using a thermal interface material (TIM) to improve heat transfer between the device and the heat sink.
    • The maximum allowed voltage on the input pins is 5.5V, but it's recommended to keep it below 5V to ensure reliable operation and prevent damage to the device.
    • Use ESD protection devices such as TVS diodes or ESD arrays on the input lines, and follow proper PCB design guidelines for ESD protection. Also, handle the device with an anti-static wrist strap or mat to prevent ESD damage during assembly.
    • Power up the device in the following sequence: VCC, then VIN, and finally the input signals. This ensures proper device initialization and prevents latch-up or damage.
    Supplyframe Tracking Pixel