The maximum operating temperature range for the ISP1760ETUM is -40°C to 85°C.
To configure the ISP1760ETUM for USB OTG mode, you need to set the OTG_EN pin high and configure the device as a USB OTG device using the USB_OTG_CFG register.
The ISP1760ETUM supports a maximum data transfer rate of 480 Mbps in High-Speed mode.
To handle suspend and resume operations, you need to use the SUSPEND and RESUME pins to control the device's power state. You can also use the USB_SUSPEND and USB_RESUME registers to configure the device's suspend and resume behavior.
The built-in voltage regulator in the ISP1760ETUM is used to generate the internal voltage supply for the device, allowing it to operate from a single external power supply.