The recommended PCB layout involves placing the HSMR-C170 near the antenna, using a solid ground plane, and minimizing the number of vias. For thermal management, ensure good airflow, use a heat sink if necessary, and follow the thermal design guidelines in the application note.
Optimize the antenna design by following the antenna design guidelines in the application note, using a 50-ohm impedance, and ensuring the antenna is matched to the HSMR-C170's output impedance. Also, consider using a directional antenna for better performance.
The recommended settings for the HSMR-C170's registers can be found in the application note and datasheet. These settings include the transmit power, data rate, and modulation scheme. Consult the documentation for specific values and configurations.
Troubleshoot issues by checking the PCB layout, antenna design, and register settings. Use tools like a spectrum analyzer to identify sources of interference. Consult the application note and datasheet for troubleshooting guidelines and FAQs.
The power consumption and current draw of the HSMR-C170 vary depending on the operating mode and transmit power. Consult the datasheet for specific values, but typically, the current draw is around 20-30 mA in transmit mode and 1-2 mA in receive mode.