The recommended operating temperature range for the HDSP-U211 is -40°C to 85°C.
The HDSP-U211 can be configured for I2S or TDM mode through the use of external resistors on the MODE pins. Refer to the datasheet for specific resistor values and configurations.
The HDSP-U211 supports clock frequencies up to 100 MHz.
To implement a CDC with the HDSP-U211, use a synchronizer circuit or a FIFO to transfer data between clock domains. Ensure that the clock frequencies and phases are properly aligned.
The power consumption of the HDSP-U211 varies depending on the operating mode and clock frequency. Refer to the datasheet for specific power consumption values.
HDSP-U211 datasheet
by Avago Technologies
