Please enter a valid full or partial manufacturer part number with a minimum of 3 letters or numbers

    Part Img HCPL-7723 datasheet by Avago Technologies

    • High Speed CMOS Optocoupler
    • Original
    • No
    • No
    • Active
    • 8541.40.80.00
    • 8541.40.80.00
    • Powered by Findchips Logo Findchips
    • Always verify details of parts you are evaluating, as these parts are offered as suggestions for what you are looking for and are not guaranteed.

    HCPL-7723 datasheet preview

    HCPL-7723 Frequently Asked Questions (FAQs)

    • Broadcom recommends a PCB layout with a solid ground plane, minimal track length, and a 50-ohm transmission line for the output stage to ensure optimal performance and minimize electromagnetic interference (EMI).
    • To ensure reliable operation in high-temperature environments, it is essential to follow proper thermal management practices, such as providing adequate heat sinking, using a thermally conductive PCB material, and keeping the junction temperature below 125°C.
    • The maximum allowable voltage on the VCC pin of HCPL-7723 is 5.5V. Exceeding this voltage can cause permanent damage to the device.
    • Yes, HCPL-7723 is designed for galvanic isolation and can be used in applications requiring electrical isolation between the input and output stages.
    • The typical propagation delay of HCPL-7723 is around 10 ns, but this can vary depending on the specific application and operating conditions.
    Supplyframe Tracking Pixel