The recommended operating voltage range for HCF4073BEY is 4.5V to 15V, although it can operate down to 3V with reduced performance.
The input voltage thresholds for the HCF4073BEY are typically around 1.5V to 3.5V, but can vary depending on the specific application and operating conditions. It's recommended to use a voltage divider or level shifter to ensure proper input voltage levels.
The maximum frequency of operation for the HCF4073BEY is typically around 10MHz, but can vary depending on the specific application, operating conditions, and output load. It's recommended to check the datasheet and application notes for specific frequency limitations.
To ensure proper power sequencing for the HCF4073BEY, it's recommended to power up the VCC pin before applying any input signals, and to power down the VCC pin after removing all input signals. This helps prevent latch-up and ensures proper device operation.
The recommended output current for the HCF4073BEY is typically around 10mA to 20mA, depending on the specific application and output load. Exceeding this current limit can cause device overheating and reduce its lifespan.
HCF4073BEY datasheet
by STMicroelectronics
