HCF4016BEY datasheet by STMicroelectronics

HCF4016BEY Frequently Asked Questions (FAQs)

• What is the maximum clock frequency that the HCF4016BEY can handle?
  The HCF4016BEY can handle clock frequencies up to 10 MHz.
• How do I ensure that the HCF4016BEY is properly powered?
  The HCF4016BEY requires a single power supply voltage of 5V ± 10% with a maximum current of 10mA. Ensure that the power supply is clean and regulated to prevent noise and voltage drops.
• What is the propagation delay of the HCF4016BEY?
  The propagation delay of the HCF4016BEY is typically around 20-30ns, but this can vary depending on the operating conditions and load capacitance.
• Can I use the HCF4016BEY in a 3.3V system?
  While the HCF4016BEY is specified for 5V operation, it can be used in a 3.3V system with some limitations. However, the output voltage swing will be reduced, and the device may not meet the specified timing parameters.
• How do I handle the output enable (OE) pin?
  The output enable (OE) pin is active-low, meaning that the outputs are enabled when OE is low. Tie OE to GND to enable the outputs, or tie it to VCC to disable them.