SL Power Electronics recommends a multi-layer PCB with a solid ground plane and a thermal pad connected to a heat sink or a metal chassis for efficient heat dissipation. A minimum of 2 oz copper thickness is recommended for the PCB.
To ensure EMC, SL Power Electronics recommends using a metal enclosure, keeping the power supply unit (PSU) away from sensitive components, and using EMI filters or shielding on the input and output lines.
The maximum allowable capacitance on the output of the GSC25BG is 2200uF. Exceeding this value may affect the stability of the power supply.
Yes, the GSC25BG can be used in a redundant or parallel configuration, but it requires additional external circuitry and careful design consideration to ensure proper operation and fault tolerance.
The MTBF of the GSC25BG is approximately 550,000 hours at 25°C, calculated according to MIL-HDBK-217F.
