A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the high-frequency signals away from the power plane and use a via-stitching technique to reduce radiation.
Use a 10uF ceramic capacitor and a 100nF ceramic capacitor in parallel, placed as close as possible to the power pins. Add a 10Ω resistor in series with the capacitors to prevent ringing.
The maximum operating temperature range for the DSA300100L is -40°C to +125°C. However, the device's performance may degrade above 85°C, so it's recommended to keep the operating temperature below 85°C for optimal performance.
Yes, the DSA300100L is designed to withstand vibrations up to 10G. However, it's recommended to follow proper mounting and soldering techniques to ensure the device is securely attached to the PCB.
Use an oscilloscope to check the input and output signals. Verify that the power supply voltage is within the recommended range and that the device is properly decoupled. Check for any signs of overheating or physical damage.
DSA300100L datasheet
by Panasonic Electronic Components
