DS92LV1224TMSA/NOPB datasheet by Texas Instruments

DS92LV1224TMSA/NOPB Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the DS92LV1224TMSA/NOPB?
  The maximum cable length supported by the DS92LV1224TMSA/NOPB is 10 meters at 3.125 Gbps and 5 meters at 6.25 Gbps, assuming a good quality cable with minimal attenuation.
• How do I ensure signal integrity with the DS92LV1224TMSA/NOPB?
  To ensure signal integrity, use a good quality cable with minimal attenuation, keep the cable length as short as possible, and use proper termination and impedance matching. Additionally, use a common mode filter or a shielded cable to reduce electromagnetic interference (EMI).
• What is the power consumption of the DS92LV1224TMSA/NOPB?
  The power consumption of the DS92LV1224TMSA/NOPB is typically around 350 mW at 3.3V supply voltage, but this can vary depending on the operating frequency and other factors.
• Can I use the DS92LV1224TMSA/NOPB in a multi-point configuration?
  No, the DS92LV1224TMSA/NOPB is designed for point-to-point connections only. It does not support multi-point configurations.
• How do I troubleshoot issues with the DS92LV1224TMSA/NOPB?
  To troubleshoot issues with the DS92LV1224TMSA/NOPB, check the power supply voltage, signal integrity, and cable quality. Use an oscilloscope to check the signal waveform and frequency. Also, check the device's operating temperature and ensure it is within the recommended range.