DS90LV110TMTCX/NOPB datasheet by Texas Instruments

DS90LV110TMTCX/NOPB Frequently Asked Questions (FAQs)

• What is the maximum cable length supported by the DS90LV110?
  The maximum cable length supported by the DS90LV110 is 10 meters at 1.5 Gbps and 5 meters at 3 Gbps, assuming a good quality cable with minimal signal attenuation.
• How do I ensure signal integrity with the DS90LV110?
  To ensure signal integrity with the DS90LV110, it is recommended to follow proper PCB layout guidelines, use a good quality cable, and terminate the transmission lines properly. Additionally, the device has built-in features such as equalization and pre-emphasis to help improve signal quality.
• Can I use the DS90LV110 with a non-TI serializer/deserializer?
  Yes, the DS90LV110 is a standard FPD-Link III device and can be used with other serializer/deserializers that comply with the FPD-Link III standard. However, it is recommended to verify compatibility and perform thorough testing to ensure proper operation.
• What is the power consumption of the DS90LV110?
  The power consumption of the DS90LV110 depends on the operating frequency and mode. Typically, it consumes around 150 mW at 1.5 Gbps and 250 mW at 3 Gbps. Refer to the datasheet for more detailed power consumption information.
• How do I configure the DS90LV110 for different data rates?
  The DS90LV110 can be configured for different data rates using the device's control pins or through the use of an external microcontroller. Refer to the datasheet and application notes for more information on configuration and programming.