The maximum cable length supported by the DS90LV019TMX is dependent on the clock frequency and the type of cable used. As a general guideline, Texas Instruments recommends a maximum cable length of 10 meters at 1.5 Gbps and 5 meters at 3 Gbps.
The DS90LV019TMX can be configured using the I2C interface. Texas Instruments provides a software development kit (SDK) that includes a GUI-based tool for configuring the device. The SDK also includes a programming guide and example code for popular microcontrollers.
The power consumption of the DS90LV019TMX varies depending on the operating mode and clock frequency. In typical operation, the device consumes around 250 mW at 1.5 Gbps and 400 mW at 3 Gbps. The device also has a low-power standby mode that consumes around 10 mW.
Yes, the DS90LV019TMX is compatible with other FPD-Link III devices from Texas Instruments. The device is designed to be backward compatible with previous generations of FPD-Link devices, and it can be used in systems that require interoperability with other FPD-Link III devices.
Texas Instruments provides a range of tools and resources for troubleshooting issues with the DS90LV019TMX, including a debugging guide, application notes, and a support forum. Engineers can also use the device's built-in diagnostic features, such as the loopback mode and the error detection and correction features, to identify and debug issues.
DS90LV019TMX datasheet
by Texas Instruments
