DS87C530-KCL datasheet by Maxim Integrated Products

DS87C530-KCL Frequently Asked Questions (FAQs)

• What is the recommended oscillator crystal frequency for the DS87C530-KCL?
  The recommended oscillator crystal frequency for the DS87C530-KCL is 12 MHz or 16 MHz, depending on the specific application requirements.
• How do I configure the watchdog timer on the DS87C530-KCL?
  The watchdog timer on the DS87C530-KCL can be configured using the WDTCON register. The WDTCON register allows you to set the watchdog timer period, enable or disable the watchdog timer, and select the clock source for the watchdog timer.
• What is the maximum current that can be sourced or sunk by the I/O pins on the DS87C530-KCL?
  The maximum current that can be sourced or sunk by the I/O pins on the DS87C530-KCL is 25 mA per pin, with a total current limit of 100 mA for all I/O pins combined.
• How do I implement a UART interface on the DS87C530-KCL?
  The DS87C530-KCL has a built-in UART module that can be configured using the UARTCON and UARTSTA registers. The UART module supports asynchronous communication at baud rates up to 115.2 kbps.
• What is the power consumption of the DS87C530-KCL in sleep mode?
  The power consumption of the DS87C530-KCL in sleep mode is typically around 10 μA, depending on the specific sleep mode and the state of the peripherals.